Occupational radiation dose management: Rad Tech
Occupational dose management helps radiologic technologists limit exposure to ionizing radiation in daily practice. Although exposure is usually low, dose can vary with the imaging environment, beam on time, distance from the patient, who is often the primary source of scatter during X-ray procedures, and shielding.
Understanding dose limits, radiation monitoring, and protective practices helps keep occupational dose as low as reasonably achievable while supporting safe imaging.
Now occupational radiation exposure refers to the radiation received as a result of working where ionizing radiation is used.
Air kerma or kinetic energy released in matter, describes the energy X-rays transfer to air, and absorbed dose describes energy deposited in tissue.
Both are expressed in gray. Because occupational doses are typically less than one gray, milli-gray is commonly used in practice.
Effective dose is expressed in sievert, typically millisievert, and is used for radiation protection because it accounts for the tissues exposed and their relative sensitivity to radiation.
Dose depends on the procedures performed, beam on time, and distance from the patient. Routine occupational doses are typically far below established limits, and monitoring tracks exposure over time.
Occupational exposure varies across clinical settings. It's greatest when personnel are near the patient during prolonged fluoroscopy.
In interventional radiology and surgery, extended beam on time and close proximity can increase staff exposure to radiation scattered from the patient, especially during C arm procedures.
In contrast, mammography produces relatively little scatter, and routine CT exposure is low when personnel remain behind the control barrier.
In situations where staff must remain in the X-ray room, they should wear appropriate protective apparel since they're close to the patient and their exposure will increase.
Mobile radiography can also have increased exposure because fixed barriers are not available and will require extra care.
Across all settings, maintaining distance, using shielding, and following safe work practices help manage occupational exposure.
Occupational radiation dose limits are established to limit the risk associated with occupational radiation exposure. Dose limits apply to whole body exposure as well as specific tissues and organs such as the lens of the eye, skin, and extremities.
Although these limits help guide radiation protection, they aren't exposure targets. Daily practice should keep dose well below these limits by keeping exposure as low as reasonably achievable, or aura.
Along with aura, occupational dose can be reduced by applying the cardinal principles of time, distance, and shielding. Time can be decreased by limiting beam on time, especially during fluoroscopy.
Increasing distance by stepping away from the patient when close contact is not needed will reduce exposure because radiation scatter falls quickly with distance.
And using barriers, protective shields, and protective apparel can effectively reduce exposure to the radiologic technologist.
Now because ionizing radiation can't be seen or felt, it's important to monitor exposure. An occupational dosimeter estimates exposure to the radiologic technologist by measuring the radiation that reaches the device.
Common types include thermoluminescent dosimeters or TLD, optically stimulated luminescence dosimeters or OSL, and direct ion storage dosimeters or DIS.
TLDs absorb and store energy in the form of excited electrons. When heated, the electrons emit visible light, which can be measured.
OSL dosimeters work similarly, but the electrons release light when stimulated with a laser. Both devices track dose over time, but OS cells are more sensitive and can measure lower levels of radiation exposure.
DIS is the latest technology, utilizing an ionization gas-filled dosimeter connected to a solid state device with electronically erasable programmable read-only memory or EEPROM.
When radiation ionizes the gas in the ionization chamber, the cumulative electric charge is stored in the device until read out by a control signal.
The amount of charge stored in the device is directly proportional to the amount of radiation exposure produced by ionization that has occurred in the chamber.
During fluoroscopy, wear the whole body dosimeter at the collar outside the apron. When the hands will receive greater exposure, wear an extremity dosimeter on a finger or wrist.
An occupational radiation monitoring report is used to provide a record of exposure for the current period and cumulative dose over the year and career.
Regular review helps confirm that protective practices are effective and flags unexpected changes for follow-up. While monitoring measures exposure, protective apparel helps reduce exposure when imaging personnel must remain near the patient.
Aprons and gloves come in different lead equivalent thicknesses. Greater lead equivalence provides more attenuation of radiation, but also adds weight.
Protective apparel should also be stored properly and periodically checked for damage. These same principles apply for pregnant radiologic technologists, with one added monitoring step.
After a pregnancy is voluntarily declared according to facility policy, the radiologic technologist's exposure history and assignments should be reviewed.
A radiation monitor is worn at waist level under the protective apron to monitor radiation exposure to the embryo or fetus.
During fluoroscopy, the regular collar dosimeter remains in place. Pregnancy does not automatically require reassignment or involuntary leave.
Any changes should be based on individual monitoring results and radiation safety guidance. All right, as a quick recap, occupational radiation dose is usually low, but varies with the procedure, beam on time, distance, and shielding.
Fluoroscopy, especially interventional procedures, and mobile imaging are the main sources of occupational exposure in diagnostic imaging.
Dose limits are safety boundaries, not targets. Correctly placed dosimeters and regular report review track exposure over time.
During pregnancy, an additional waist dosimeter under the apron helps estimate dose to the embryo or fetus. Together, these practices help to monitor and minimize occupational radiation
- "Radiologic science for technologists: Physics, biology, and protection (13th ed.)" Elsevier (2026)
- "Principles of radiographic imaging: An art and a science (7th ed.)" Elsevier (2026)
No notes for this video yet
Try adding a note below