Occupational radiation dose management: Rad Tech
Occupational dose management helps radiologic technologists limit exposure to ionizing radiation in daily practice. Although exposure is usually low, dose can vary with the imaging environment, beam-on time, distance from the patient, who is often the primary source of scatter during x-ray procedures, and shielding. Understanding dose limits, radiation monitoring, and protective practices helps keep occupational dose as low as reasonably achievable while supporting safe imaging.
Now, occupational radiation exposure refers to the radiation received as a result of working where ionizing radiation is used. Air kerma, or kinetic energy released in matter, describes the energy x-rays transfer to air, and absorbed dose describes energy deposited in tissue. Both are expressed in Gy. Because occupational doses are typically less than one Gy, mGy is commonly used in practice. Effective dose is expressed in Sv, typically mSv, and is used for radiation protection because it accounts for the tissues exposed and their relative sensitivity to radiation.
Dose depends on the procedures performed, beam-on time, and distance from the patient. Routine occupational doses are typically far below established limits, and monitoring tracks exposure over time.
Occupational exposure varies across clinical settings. It's greatest when personnel are near the patient during prolonged fluoroscopy. In interventional radiology and surgery, extended beam-on time and close proximity can increase staff exposure to radiation scattered from the patient, especially during C-arm procedures. In contrast, mammography produces relatively little scatter, and routine CT exposure is low when personnel remain behind the control barrier. In situations where staff must remain in the x-ray room, they should wear appropriate protective apparel, since they’re close to the patient and their exposure will increase. Mobile radiography can also have increased exposure because fixed barriers are not available, and will require extra care. Across all settings, maintaining distance, using shielding, and following safe work practices help manage occupational exposure.
Occupational radiation dose limits are established to limit the risk associated with occupational radiation exposure. Dose limits apply to whole-body exposure as well as specific tissues and organs, such as the lens of the eye, skin, and extremities. Although these limits help guide radiation protection, they aren’t exposure targets. Daily practice should keep dose well below these limits by keeping exposure as low as reasonably achievable, or ALARA.
Along with ALARA, occupational dose can be reduced by applying the cardinal principles of time, distance, and shielding. Time can be decreased by limiting beam-on time, especially during fluoroscopy. Increasing distance by stepping away from the patient when close contact is not needed will reduce exposure because radiation scatter falls quickly with distance. And, using barriers, protective shields, and protective apparel can effectively reduce exposure to the radiologic technologist.
- "Radiologic science for technologists: Physics, biology, and protection (13th ed.)" Elsevier (2026)
- "Principles of radiographic imaging: An art and a science (7th ed.)" Elsevier (2026)
Aún no hay notas para este video
Intenta agregar una nota a continuación