Pelvis and hip radiography: Rad Tech

Ver video solo

Pelvis and hip radiography evaluates bones, joints, and surrounding anatomy. Utilized when a patient has acute nontraumatic pain, limited motion, chronic symptoms, or needs follow-up after treatment.

Standardized projections demonstrate alignment and changes related to developmental, inflammatory, degenerative, and other conditions.

Imaging can also support surgical planning and assess orthopedic hardware or a prosthesis after surgery.

To make these assessments reliable, technologists use standard projections and consistent anatomic landmarks. The AP pelvis projection provides an overview of the pelvic girdle, both hip joints, and proximal femora.

It's commonly used to assess alignment, symmetry, degenerative joint disease, and developmental conditions.

When movement is safe, internally rotate the feet and lower limbs 15 to 20 degrees.

This brings the femoral necks more parallel to the image receptor, placing the greater trochanters in profile.

This also prevents foreshortening, which makes the femoral necks appear shorter on the image than they actually are.

Do not force this rotation when fracture or dislocation is suspected.

Next, the lateral hip projection provides a focused view of one hip, including the femoral head and neck, acetabulum, the lesser trochanter in profile, and the proximal femur.

The technique depends on the clinical situation. A modified Cleaves, or frog-leg position,may be used for a nontraumatic exam when the patient can safely flex and abduct the hip.

For a bilateral examination, the hips and knees are flexed, the femora are abducted equally, and the feet are brought together. This demonstrates both the femoral heads and necks, acetabula, and trochanteric regions.

If only one hip is of interest or if the patient can’t position both legs equally, the patient will abduct the affected hip and knee and draw the affected foot upward toward the opposite knee.

If fracture or dislocation is suspected, use a horizontal beam axiolateral projection to minimize movement of the affected limb.

Choosing the projection is only part of the exam; positioning must also be safe and tolerable. Before moving the patient, assess pain, mobility, and the ability to hold the required position.